Tire maintenance forms a major part of car repairs in Irving, TX. After all, tires are the only point of contact we have with the road, as they are essential to propel and stop our vehicles. We rely only on those four patches of rubber at each corner of the car to keep us safe on the road.
We must make sure that they are adequately inflated, in good condition, and not too old.
All car manufacturers choose specific types of tires to be fitted on their cars. They consider various factors before deciding, for example, what the vehicle was built for, what weight loads it is going to handle, and its maximum performance. After determining such factors, they choose a specific type of tire that fits their car’s needs the best.
It is vital to have the same considerations when you plan on replacing your tires. Choosing the wrong type of tire can end up having severe consequences.
There have been where the vehicle manufacturer made the wrong choice of tire, which led to serious accidents and vehicle damage.
This is why it is important to go to a professional auto and tire service provider to help you pick your vehicle’s perfect tires.
Tire inflation is the key for three reasons, comfort, fuel efficiency, and handling. All automotive manufacturers have their recommended tire inflation posted on their vehicles. These recommendations are based on the perfect pressure for two reasons.
The higher your tire pressure is, the lesser rolling resistance there will be on your vehicle. It also helps you give a better fuel efficiency, a rougher ride, and less traction.
In contrast, the lower your tire pressure is, the better traction you get, along with a smoother ride. However, this will give you fuel economy and excess wear.
This is why all manufacturers believe that there has to be a balance of smooth ride, superior handling, and good fuel efficiency. Manufacturers ideally put a dedicated sticker with the optimal pressure mentioned near the driver door edge or on your fuel door.
There is also a choice for a partially loaded or fully-loaded car. You can go ahead and choose the inflation that suits your needs the best. After all, it is always better to have a perfectly inflated tire than having a flat tire.
Good condition and proper tracking
In order to keep up with your tire wear, you need to look out for four things. Look for how deep is your tread, tire balance, damage, and your vehicle’s wheel alignment.
The tread is what tire manufacturers use to move water under your tires. Without tread, a tire would simply hydroplane and slide on the road. The minimum tire depth for a standard road car is 3/32 of an inch. This is the minimum depth that you want to see anywhere on your tire.
Even though one part of your vehicle’s tire may show considerably more, there still could be chances that it is down to the steel belts someplace else.
When checking your tires, you must check the full width of your tire. The simplest way to measure the entire width is by using a penny. Place a penny on edge with Lincoln’s head aiming in towards the tire.
If the top portion of his head is visible, that means your tire is worn out. You need to examine all four tires and make sure that you sample each tire’s complete circumference. If you notice that you have uneven tread wear, it is probably an alignment problem.
Alignment is how you keep your vehicle tracking spirit. If you notice that your tire is worn more on the outside or the inside edge, it suggests that your alignment needs adjustment.
In return for this, you get premature tire wear, which is usually on the inside edge. You will notice a severely worn inner tread and a near-perfect outer tread pattern. This is why it is crucial for you, as the owner, to check your tires’ entire width.
If a particular tire is not balanced correctly, it will result in a vibration that can be felt through your steering or the car itself. Ideally, it is a five-mile range that you start feeling the vibration (e.g., 60 mph to 75 mph).
This can commonly be mistaken as an alignment problem. If not properly addressed, it can lead to scalloping of your tire’s tread and noisy tires.
How old is too old?
Our team at Express Auto & Tires have noticed two most commonly asked questions: how do you tell the age of a tire and what’s wrong with using an old tire.
Tires have their manufacturing dates written in an oval on the side and consist of four numbers. The first pair of numbers tell you the week it was manufactured, and the second pair is the year.
6 to 8 years can be a reasonable timeframe when you should consider getting your tires replaced, despite how much tread they have left on them.
Factors that contribute to your tire’s aging process are heat and humidity. You need to inspect your tires to find out if there are any cracks on the sidewall, check the manufacturing date, and most importantly, have a professional tire expert inspect your tires and follow their recommendations.
As a local company, proudly serving Irving, Texas and surrounding areas, Express Auto & Tires is committed to providing excellent services and maintaining our reputation in the area.
When you hire Express Auto & Tires, you’re hiring a full service Auto Shop Service with the experience and expertise required for all your needs.
Our team meets the highest standards in experience and skills. We work hard to ensure our staff are duly trained and remain up to date in the latest trends in the industry.
Get in touch with Express Auto & Tires.
Just like we’ve discussed here, tire maintenance is important at many levels, which is why you should get in touch with our team at Express Auto & Tires to get your tire installation, check-up, and repair done professionally.
If you feel like you need to get your tires checked or replaced, give us a call at 972-313-7600, and one of our professionals will answer all your queries. Besides giving you tips on how to get the most out of your old tires, out team can also help you find new tires that are perfect for your vehicle.